New Metal Detector System provides optimal Protection for Machines and Plants

Posted on 05 Mar 2013

Metal detector and amplifier unit underneath a conveyor belt

 

New EGE MDV 80015 Metal Detector

The new EGE MDV 80015 amplifier for metal detector coils shows the degree to which the detector system is affected by permanently installed metal components in the proximity of the detector coil, allowing users to optimize the sensitivity. The LED remains dark if the plant construction causes no major interference. Simple flashing indicates that operation may be affected, and periodical flashing indicates that there is too much metal near the detector coil. In this case, users are advised to install the coil in a different place or, if possible, remove metal parts from its proximity.

The MDV amplifier requires a 24 V DC power supply and comes in an IP67 aluminum housing measuring 260 x 160 x 90 mm. The unit can be used at ambient temperatures between -25°C and +70 °C.

 

Contact us today for our Industrial Metal Detectors

For more advice regarding our Industrial Metal Detector systems and devices please contact us direct today. Call us on +44(0)1827 310 666 or fill in our online enquiry form

 

Enquire Now

If you're interested in Industrial Metal Detectors or anything related to it we'd be pleased to hear from you. Either give us a call on 44(0) 1827 310 666 or fill out the short form below.