Simply fill in the form below and press send and we will get back to you shortly regarding your enquiry.
This temperature sensor can be exchanged during hot swap temperature controller operation so there’s no need to stop the process. TN-type Temperature Controller Sensors are inserted into containers or pipes via a special stainless steel AISI 316Ti screw-in socket which allows users to remove and exchange them without leaking or polluting the process liquid. Featuring a separate control unit with a digital display, the temperature meter can be easily programmed via three buttons. Users can program two fixed switching points. Additional freely programmable functions include hysteresis, temperature windows, and on/off delay.
The Temperature Controller Sensor stores the minimum and maximum measurement after voltage has been applied; the memory can be reset at any time. Temperature values are optionally displayed in °C or °F. The system measures media temperatures between -40 and +120 °C. It is suited for ambient temperatures between -20 and +60 °C and pressures up to 20 bar, and features IP65 protection. Different models are available as DC or AC units for 230 V and 115 V, or with an OptoMOS relay, and optionally with a PNP or analog output. Featuring a G½ thread, the sensors are connected via an M12 plug connector or a fixed cable.